Avalanche danger • Verwallgruppe Mitte region • 2025/26
Link copied
Verwall Mountains Central
Verwallgruppe Mitte
Thu 19 Mar
Day Risk Profile
1
Low
below 2000m
2
Moderate
above 2000m
Avalanche Problems
Above 2000 m
Moderate
(2)
Dry avalanches
· all day
Wind slab + Persistent weak layersSlab2
N, NE, E, W, NW
above 2000m
MediumSomePoor
GM.6GM.7
Field notes▾
Wind slab
Look for fresh snow deposits on Slope facing downwind/ wind sheltered aspect. Snow deposits can attain several times average snow depth.EAWS glossary, in Usually a steep, elongated, eroded trench; typically prone to snowdrift accumulation.EAWS glossary and Rounded or elongated concavity; typically tending to accumulate snowdrift.EAWS glossary, and behind ridgelines and abrupt changes in terrain — these are where the wind has loaded the snow into slabs that are easy to trigger. Recent avalanches, shooting cracks under your weight, and Distinctive noise (resembling a “whumpf” sound) occurring when a weak layer beneath a slab collapses. The air of the weak layer is forced outside the snowpack, with the resulting whumpf sound being heard. The sound usually indicates an unstable situation and can be accompanied by surface cracking. A whumpf is a clear avalanche alert.EAWS glossary sounds are clear confirmations of the problem. The safest move is to avoid wind-loaded terrain entirely. NB wind signs alone don't always mean an avalanche problem exists, and the age of drifted snow is hard to judge.
Persistent weak layers
Persistent Snowpack layer in which the crystals are poorly bonded and the layer has the potential to fail. Typical crystals in dry weak layers causing avalanches are : precipitation particles; surface hoar; faceted crystals; hollow crystals; graupel. Generally >1mm in size, loose grains with few bonds Wet weak layers can be formed by all snow crystal/grain types.EAWS glossary are very challenging to recognise. Distinctive noise (resembling a “whumpf” sound) occurring when a weak layer beneath a slab collapses. The air of the weak layer is forced outside the snowpack, with the resulting whumpf sound being heard. The sound usually indicates an unstable situation and can be accompanied by surface cracking. A whumpf is a clear avalanche alert.EAWS glossary sounds and shooting cracks are typical when present, but you can have a serious weak layer with no warning signs at the surface. Knowledge of how the Snow deposited on the ground in a multiplicity of layers.EAWS glossary has evolved is essential. SLF's travel advice is direct: travel conservatively, avoid terrain where the consequences of being caught are large, and treat the history of weather and snow as more important than what you can see today. Read the full bulletin.
Fresh and somewhat older wind slabs can be released easily in some places, especially on very steep west, north and east facing slopes above approximately 2000 m. Small and, in isolated cases, medium-sized avalanches are possible. Locations delineated by aspect or altitude where avalanches can trigger and people or objects are at risk.EAWS glossary are to be found in Usually a steep, elongated, eroded trench; typically prone to snowdrift accumulation.EAWS glossary and Rounded or elongated concavity; typically tending to accumulate snowdrift.EAWS glossary, and behind abrupt changes in the terrain, in particular at elevated altitudes. In the regions neighbouring those that are subject to danger level 3 (considerable) the avalanche prone locations are larger. Additionally in isolated cases avalanches can be triggered in near-ground layers. The avalanche prone locations are to be found in particular on very steep west, north and east facing slopes above approximately 2000 m. Such avalanche prone locations are rare but are barely recognisable. In the regions exposed to heavier precipitation moist loose snow avalanches are possible, but they will be mostly small. In the event of solar radiation this applies in particular.
Outlook
→Constant avalanche danger
20 March 2026
Wind slabs and weakly bonded old snow require caution.
Snowpack & Weather
Snowpack▾
As a consequence of a sometimes strong wind from variable directions, sometimes avalanche prone wind slabs formed in the last few days. The fresh and somewhat older wind slabs are lying on the unfavourable surface of an Snow layers deposited from earlier precipitation, prior to fresh fallen snow. Old snow layers consist of metamorphosed snow crystals.EAWS glossary. Avalanche prone Snowpack layer in which the crystals are poorly bonded and the layer has the potential to fail. Typical crystals in dry weak layers causing avalanches are : precipitation particles; surface hoar; faceted crystals; hollow crystals; graupel. Generally >1mm in size, loose grains with few bonds Wet weak layers can be formed by all snow crystal/grain types.EAWS glossary exist in the bottom section of the Snow deposited on the ground in a multiplicity of layers.EAWS glossary on west, north and east facing slopes. This applies above approximately 2000 m. Steep sunny slopes: Sunshine and high temperatures will give rise to increasing moistening of the snowpack.
Snowdesk needs a refreshIt couldn't update itself. Reload to finish.ReloadDismissUpdating…Updating SnowdeskApplying the new version — the page will reload in a moment.
Update required
This version of Snowdesk is no longer supported. Reload to continue.
Install Snowdesk
Add Snowdesk to your home screen for one-tap access and a full-screen map. Downloaded areas read without a signal either way.
Add Snowdesk to your Home Screen
Tap the Share icon, then choose Add to Home Screen. Snowdesk then opens full screen. Downloaded areas read without a signal either way.
Reset local data
Snowdesk needs to reset local data on this device to keep working. Your
account and everything saved to it are stored on the server and are not affected.
Some changes couldn't be saved and won't be retried.
Snowdesk has not been saved on this device yet, so switching Offline mode on will stop it
opening at all until you switch it off again.
Switch it on anyway?Custom area %(n)sGetting ready…Getting ready… (%(n)s of %(total)s)Ready — %(total)s areas up to dateReady — 1 area up to date%(ready)s of %(total)s ready%(n)s changes still waiting to send1 change still waiting to sendBulletins from %(day)s%(metres)s m altitudeNo bulletin coverage for this location.Rating expired — reconnect to see today's danger levelas of %(time)sShowing cached data — as of %(time)s